 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Super Fast Recovery Diode RF505B6S Series Standard Fast Recovery DimensionsUnit : mm Land size figure (Unit : mm) 6.0 Applications General rectification (2) 1.6 1.6 (3) 2.3 2.3 Features 1)Power mold type.CPD 2)High switching speed 3)Low Reverse current (1) CPD Structure Construction Silicon epitaxial planar Production month (1) Taping dimensionsUnit : mm 3.0 2.0 6.0 (2) (3) Absolute maximum ratingsTc=25C Parameter Symbol Repetitive peak Reverse voltage Reverse voltage Average rectified forward current Forward current surge peak Junction temperature Storage temperature VRM VR Io IFSM Tj Tstg Conditions Duty0.5 Direct voltage 60Hz half sin wave,resistive load Tc=42C Limits 600 600 5 50 150 -55to+150 Unit V V A A C C 60Hz half sin wave, Non-repetitive one cycle peak value, Tj=25 C Electrical characteristicsTj=25C Parameter Symbol Forward voltage Reverse current Reverse recovery time Thermal resistance VF IR trr Rth(j-l) Conditions IF=5.0A VR=600V IF=0.5A,IR=1A,Irr=0.25xIR junction to lead Min. - Typ. 1.3 0.05 22 Max. 1.7 10 30 12 Unit V A ns C/W www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 1/3 2010.01 - Rev.A RF505B6S Data Sheet Electrical characteristic curves 100 Tj=125C 10 Tj=150C 100000 Tj=150C 1000 f=1MHz REVERSE CURRENT:IR(nA) FORWARD CURRENT:I F(A) CAPACITANCE BETWEEN TERMINALS:Ct(pF) 600 10000 1000 Tj=75C Tj=125C 100 1 Tj=25C 0.1 Tj=75C 100 Tj=25C 10 10 0.01 0 500 1000 1500 2000 2500 1 0 100 200 300 400 500 REVERSE VOLTAGE:VR(V) VR-IR CHARACTERISTICS 1 0 5 10 15 20 25 30 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS FORWARD VOLTAGE:V F(mV) VF-IF CHARACTERISTICS 1400 Tj=25C IF=5A n=20pcs 100 Tj=25C VR=600V n=20pcs AVE:33.7nA 10 170 Tj=25C f=1MHz VR=0V n=10pcs FORWARD VOLTAGE:V F(mV) REVERSE CURRENT:IR(nA) CAPACITANCE BETWEEN TERMINALS:Ct(pF) 1350 160 1300 150 AVE:150.6pF 140 1250 1200 AVE:1297mV 130 1150 1100 VF DISPERSION MAP 1 IR DISPERSION MAP 120 Ct DISPERSION MAP 300 RESERVE RECOVERY TIME:trr(ns) 250 Ifsm 200 8.3ms 150 100 AVE:107.5A 50 0 1cyc 30 Tj=25C IF=0.5A IR=1A Irr=0.25xIR n=10pcs 1000 PEAK SURGE FORWARD CURRENT:I FSM(A) PEAK SURGE FORWARD CURRENT:I FSM(A) 25 20 AVE:22.0ns 15 10 100 10 Ifsm 8.3ms 8.3ms 5 1cyc 1 1 trr DISPERSION MAP 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 0 IFSM DISRESION MAP 1000 30 No break at 30kV Ifsm ELECTROSTATIC DISCHARGE TEST ESD(KV) t 25 20 15 10 5 0 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 C=200pF R=0 C=100pF R=1.5k AVE:19.9kV 100 On glass-epoxy board TRANSIENT THAERMAL IMPEDANCE:Rth (C/W) Rth(j-a) PEAK SURGE FORWARD CURRENT:I FSM(A) 10 Rth(j-c) IM=100mA 100 IF=1.5A 1 1ms tim 300us 0.1 0.001 10 0.01 0.1 1 10 TIME:t(s) Rth-t CHARACTERISTICS 100 1000 ESD DISPERSION MAP www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.01 - Rev.A RF505B6S Data Sheet 0A 0V t Io VR D=t/T VR=480V Tj=150C 7 D.C. 6 half sin wave FORWARD POWER DISSIPATION:Pf(W) 5 D=0.1 4 D=0.05 3 2 1 0 0 2 4 6 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) Io-Pf CHARACTERISTICS 8 D=0.2 D=0.5 D=0.8 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 9 8 7 6 5 4 3 2 1 0 0 30 60 90 120 150 AMBIENT TEMPERATURE:Ta(C) Derating Curve"(Io-Ta) D=0.2 D=0.1 D=0.05 D.C. D=0.8 0A 0V t T D=0.5 half sin wave Io VR D=t/T VR=480V Tj=150C AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 9 T 8 D.C. 7 6 5 half sin wave 4 3 2 1 0 0 30 60 90 D=0.2 D=0.1 D=0.05 D=0.8 D=0.5 120 150 CASE TEMPARATURE:Tc(C) Derating Curve"(Io-Tc) www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.01 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A |
Price & Availability of RF505B6S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |